DRIVER SIDE : Component Function Check

1. Select "MIR/SEN LH U-D", "MIR/SEN LH R-L" in "Data monitor" with CONSULT-III.
2. Check mirror sensor (driver side) signal under the following condition.
   MONITOR ITEM CONDITION CHART
   
   

   Monitor item	Condition		Value
   MIR/SEN LH U-D	Door mirror (driver side)	Close to peak	3.4 [V]
   		Close to valley	0.6 [V]
   MIR/SEN LH R-L		Close to right edge	3.4 [V]
   		Close to left edge	0.6 [V]

Is the indication normal? 

YES: INSPECTION END

NO: Perform diagnosis procedure. Refer to , "DRIVER SIDE : DIAGNOSIS PROCEDURE ".