FixVault
Home › Infiniti › 2008 › G35 Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - DTCS U1000 Through P0153 › DTC U1010: Control Unit (Can) › Diagnosis Procedure

Diagnosis Procedure

  1. INSPECTION START

    With CONSULT-III 

    1. Turn ignition switch ON.
    2. Select "SELF-DIAG RESULTS" mode with CONSULT-III.
    3. Touch "ERASE".
    4. Perform DTC Confirmation Procedure.

      See "DTC LOGIC ".

    5. Check DTC.

    With GST 

    1. Turn ignition switch ON.
    2. Select "Service $04" with GST.
    3. Perform DTC Confirmation Procedure.

      See "DTC LOGIC ".

    4. Check DTC.

    Is the DTC U1010 displayed again? 

    YES: GO TO 2.

    NO: INSPECTION END

  2. REPLACE ECM
    1. Replace ECM.
    2. Go to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : SPECIAL REPAIR REQUIREMENT ".

    INSPECTION END

About FixVault