FixVault
Home › Infiniti › 2008 › G35 Base › Repair and Diagnosis › External Pages › Different car › Section 12 (Automatic Transmission) › On-Vehicle Repair › Shift Control System › Control Device Removal and Installation › Removal

Control Device Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

Floor shift

  1. Remove negative battery terminal. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove A/T finisher. Refer to "REMOVAL AND INSTALLATION ".
  3. Disconnect A/T device harness connector.
  4. Disconnect selector control cable.
  5. Remove control device assembly.
About FixVault