Physical Values
WARNING: This page is about a different car, the 2008 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
PHYSICAL VALUES
| Terminal (Wire color) | Description | Condition | Reference value (Approx.) | |||
|---|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | |||
| 1 (B) | Ground | Ground | - | Ignition switch ON | - | 0V |
| 2 (BR/Y) | Ground | Inverter VCC | Input | Ignition switch ACC | - | 9V |
| 3 (B/O) | Ground | Signal VCC | Input | Ignition switch ACC | - | 9V |
| 4 | - | Shield | - | - | - | - |
| 5 (L) | Ground | AUX image ground | - | Ignition switch ON | - | 0V |
| 6 (B) | Ground | RGB signal (G: green) | Input | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 7 | - | Shield | - | - | - | - |
| 8 (W/L) | Ground | Horizontal synchronizing (HP) signal | Output | Ignition switch ON | - | |
| 9 (O) | Ground | RGB area (YS) signal | Input | Ignition switch ON | At RGB image displayed | 5V |
| At rear view camera image displayed | ||||||
| 11 (V) | Ground | Communication signal (CONT→DISP) | Input | Ignition switch ON | When adjusting display-brightness | |
| 13 (B) | Ground | Inverter ground | - | Ignition switch ON | - | 0V |
| 14 (G/O) | Ground | Signal ground | - | Ignition switch ON | - | 0V |
| 15 (Y) | Ground | AUX image signal | Input | Ignition switch ON | When AUX mode is selected | |
| 16 (G) | - | AUX image synchronizing signal | Input | - | - | - |
| 17 (W) | Ground | RGB signal (R: red) | Input | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 18 (R) | Ground | RGB signal (B: blue) | Input | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 19 (W) | Ground | RGB synchronizing signal | Input | Ignition switch ON | - | |
| 20 (O/L) | Ground | Vertical synchronizing (VP) signal | Output | Ignition switch On | - | |
| 21 | - | Shield | - | - | - | - |
| 22 (LG) | Ground | Communication signal (DISP→CONT) | Output | Ignition switch ON | When adjusting display-brightness | |
| 23 | - | Shield | - | - | - | - |