Component Function Check

WARNING: This page is about a different car, the 2008 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select "TILT SEN" in "Data monitor" mode with CONSULT-III.

Check the tilt sensor signal under the following condition.

MONITOR ITEM VALUE CHART

Monitor item	Condition	Value
TILT SEN	Tilt position	Change between 1.2 V (Close to top) 3.4 V (Close to bottom)

Is the indication normal?

YES: INSPECTION END

NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".