DTC Detection Logic
DTC DETECTION LOGIC REFERENCE
| DTC |
Item (CONSULT-III screen terms) |
Diagnostic item is detected when... |
Possible cause |
| P1815 |
MANU MODE SW/CIRC |
- TCM monitors manual mode, non manual mode, up or down switch signal, and detects as irregular when impossible input pattern occurs 2 second or more.
- When shift up/down signal of paddle shifter continuously remains ON for 60 seconds. (With paddle shifter)
|
- Harness or connectors (These switches circuit is open or shorted.)
- Manual mode select switch (Into control device)
- Manual mode position select switch (Into control device)
- Paddle shifter
|