FixVault
Home › Infiniti › 2008 › G37 Base › Repair and Diagnosis › Body & Frame › Seats › Automatic Drive Positioner › Function Diagnosis › Automatic Drive Positioner System › Power Walk-In Function › POWER WALK-IN FUNCTION : Component Description › Control Units

Control Units

ITEM FUNCTION REFERENCE CHART

Item Function
Driver seat control unit
  • Main units of automatic drive positioner system
  • It is connected to the CAN.
  • It communicates with the automatic drive positioner control via UART communication.
BCM Transmit the following status to the driver seat control unit via CAN communication.
  • Driver door: OPEN/CLOSE
  • Starter: CRANKING/OTHER
Unified meter and A/C amp. Transmit the vehicle speed signal to the driver seat control unit via CAN communication.
About FixVault