FixVault
Home › Infiniti › 2008 › G37 Base › Repair and Diagnosis › Body & Frame › Seats › Automatic Drive Positioner › On-Vehicle Repair › Automatic Drive Positioner Control Unit › Removal and Installation › Removal

Removal and Installation: Removal

CAUTION: When removing and installing, use shop cloths to protect parts from damage.
  1. Remove battery negative terminal.
  2. Remove instrument driver lower panel. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove screws (A).
  4. Remove automatic drive positioner control unit (1).
    Fig 1: Identifying Automatic Drive Positioner Control Unit And Screws
    G05219824Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault