FixVault
Home › Infiniti › 2008 › G37 Base › Repair and Diagnosis › Brakes › Traction Control › Brake Control System › Component Diagnosis › Parking Brake Switch › Component Inspection

Component Inspection

  1. CHECK PARKING BRAKE SWITCH
    1. Turn ignition switch OFF.
    2. Disconnect parking brake switch connector.
    3. Check continuity between parking brake switch connector terminal.
    CONTINUITY REFERENCE CHART

    Parking brake switch - Condition Continuity
    Connector Terminal
    B14 (M/T models)
    E107 (A/T models)    		 1 Ground When the parking brake switch is operated. Existed
    When the parking brake switch is not operated. Not existed

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace parking brake switch.

About FixVault