FixVault
Home › Infiniti › 2008 › G37 Base › Repair and Diagnosis › External Pages › Different car › Section 34 (Transfer Case) › On-Vehicle Repair › Shift Control › Disassembly and Assembly › Disassembly

Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2008 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the snap ring.
  2. Remove the retaining pin.
  3. Remove the drum cam from the control shift rod.
    Fig 1: Identifying Retaining Pin And Snap Ring
    G04898606Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Remove the retaining pin from the L-H shift rod.
  5. Remove the 2-4 shift bracket.
    Fig 2: Identifying Retaining Pin And L-H Shift Rod
    G04898607Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Remove the retaining ring from the 2-4 shift fork using suitable tool.
  7. Remove the fork guide collar and 2-4 shift fork spring from the 2-4 shift fork.
    Fig 3: Removing Retaining Ring
    G04898608Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault