Component Function Check

WARNING: This page is about a different car, the 2008 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select "DETENT SW" signal in "Data monitor" mode with CONSULT-III.
Check park position switch signal under the following conditions.

CONDITION CHART

Monitor item	Condition		Status
DETENT SW	A/T selector lever	P position	OFF
DETENT SW	A/T selector lever	Other than above	ON

Is the indication normal?

Yes: INSPECTION END

No: Perform diagnosis procedure. Refer to , "DIAGNOSIS PROCEDURE (FLOOR SHIFT) " or , "DIAGNOSIS PROCEDURE (COLUMN SHIFT) ".