Component Function Check

WARNING: This page is about a different car, the 2008 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select "SLIDE PULSE" in "Data monitor" mode with CONSULT-III.
Check sliding sensor signal under the following conditions.

SLIDING SENSOR SIGNAL CONDITIONS CHART

Monitor item	Condition		Valve
SLIDE PULSE	Seat sliding	Operate (forward)	Change (increase)
		Operate (backward)	Change (decrease)
		Release	No change

Is the indication normal?

Yes: INSPECTION END

No: Perform diagnosis procedure. Refer to , "DIAGNOSIS PROCEDURE ".