Shift Control: Inspection

After installing, confirm the following items:

• When control lever assembly is shifted to each position, make sure there is no binding or disconnection in each boot.
• When shifted to each position, make sure there is no noise, binding, and backlash. Especially when control lever assembly is shifted to 5th, 6th without pressing downward, check for binding.
• When control lever assembly is shifted to 1st-2nd side and 5th-6th side, confirm control lever assembly returns to neutral position smoothly.
• In any position other than reverse, confirm that control lever assembly can be pressed downward.
• With control lever assembly pressed downward, confirm that it can be shifted to reverse.
• When shifted from reverse to neutral position, confirm control lever assembly returns to neutral position smoothly with spring power.
• Without control lever assembly pressed downward, confirm that it cannot be shifted to reverse.