FixVault
Home › Infiniti › 2008 › M35 Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (VQ35DE) - Introduction › Basic Service Procedure › Fuel Pressure Check › Fuel Pressure Release › With CONSULT-III

With CONSULT-III

  1. Turn ignition switch ON.
  2. Perform "FUEL PRESSURE RELEASE" in "WORK SUPPORT" mode with CONSULT-III.
  3. Start engine.
  4. After engine stalls, crank it two or three times to release all fuel pressure.
  5. Turn ignition switch OFF.
About FixVault