FixVault
Home › Infiniti › 2008 › M35 Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (VQ35DE) - Introduction › Basic Service Procedure › Fuel Pressure Check › Fuel Pressure Release › Without CONSULT-III

Without CONSULT-III

  1. Remove fuel pump fuse (1) located in IPDM E/R (2).
  2. Start engine.
  3. After engine stalls, crank it two or three times to release all fuel pressure.
  4. Turn ignition switch OFF.
  5. Reinstall fuel pump fuse after servicing fuel system.
    Fig 1: Identifying Fuel Pump Fuse And IPDM E/R
    G05209458Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault