Customize Parameters

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

CUSTOMIZING FUNCTION WITH TECHSTREAM

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Connect Techstream to the DLC3.
Turn the ignition switch ON.
Turn the tester ON.
Enter the following menus:
Techstream - Select: Customize Setting.

Select the setting by referring to the table below.

Techstream

Warning:

TECHSTREAM WARNING REFERENCE

Display (Item)	Default	Contents	Setting
Key Remind Volume	Large	To change volume of key reminder buzzer	Large / Medium / Small
Key Remind Sound	1200	To change frequency of key reminder buzzer	600/900/1200
P-Seatbelt Warning Buzzer	ON	To change setting of passenger side seat belt warning buzzer	ON / OFF

CUSTOMIZING FUNCTION WITH MULTI-INFORMATION DISPLAY (w/ Multi-information Display)
1. Using the SETUP switch and SELECT switch, the following functions can be customized through the multi-information display. Refer to the illustration below.
  - Unit setting
  - Wireless door lock control system (answer-back function, automatic lock function, 2-step unlock function)
  - Power door lock control system (automatic door lock function, automatic door unlock function)
  - Lighting system (auto light turn off function)
  - Default setting (customize setting cancel function)
    
    Fig 1: Customizing Function With Multi-Information Display (1 Of 4)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    
    Fig 2: Customizing Function With Multi-Information Display (2 Of 4)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    
    Fig 3: Customizing Function With Multi-Information Display (3 Of 4)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    
    Fig 4: Customizing Function With Multi-Information Display (4 Of 4)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    
    HINT:
    
    *: When setting change operation is performed by SELECT switch, writing of customized value must be performed.