FixVault
Home › Infiniti › 2008 › M45 Base › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Auto Cruise Control System › ICC › Action Test › ICC System Running Test › Vehicle-To-Vehicle Distance Control Mode › Check For Distance Switch

Check For Distance Switch

  1. Start engine.
  2. Press the MAIN switch for less than 1.5 seconds.
  3. Press the DISTANCE switch.
  4. Check if the set distance indicator changes display in order of: (Long)→(Middle)→(Short).
    NOTE: The set distance indicator shows (Long) immediately after the engine starts.
    Fig 1: Identifying Indicator Display
    G05723201Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault