FixVault
Home › Infiniti › 2008 › M45 Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (VK45DE) - DTCS P0460 Through P1421 › DTC P1140, P1145 IVT Control Position Sensor › DTC Confirmation Procedure

DTC Confirmation Procedure

NOTE: If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
  1. Start engine and let it idle for 10 seconds.
  2. Check 1st trip DTC.
  3. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault