FixVault

Terminals and Reference Values for BCM

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Check combination switch system terminal waveform under the loaded condition with lighting switch, turn signal switch and wiper switch OFF not to be fluctuated by overloaded.
  • Turn wiper intermittent dial position to 4 except when checking waveform or voltage of wiper intermittent dial position. Wiper intermittent dial position can be confirmed on CONSULT-III. Refer to "DATA MONITOR ".
DATA MONITOR REFERENCE

Terminal No. Wire Color Signal name Measuring condition Reference value
Ignition switch Operation or condition
3 L/B Combination switch input 4 ON Lighting, turn, wiper switch
(Wiper intermittent dial position 4)
OFF Approx. 0 V
Front fog lamp switch (Operates only front fog lamp switch)
G04878683Courtesy of NISSAN MOTOR CO., U.S.A.
11 LG Ignition switch (ACC) ACC - Battery voltage
32 GY/R Combination switch output 5 ON Lighting, turn, wiper switch
(Wiper intermittent dial position 4)
OFF
G04878928Courtesy of NISSAN MOTOR CO., U.S.A.
Front fog lamp switch (Operates only front fog lamp switch)
G04878688Courtesy of NISSAN MOTOR CO., U.S.A.
38 W/L Ignition switch (ON) ON - Battery voltage
39 L CAN - H - - -
40 P CAN - L - - -
42 L/R Battery power supply OFF - Battery voltage
49 B Ground ON - Approx. 0 V
52 B Ground ON - Approx. 0 V
55 G Battery power supply OFF - Battery voltage