FixVault
Home › Infiniti › 2008 › M45 Base › Repair and Diagnosis › External Pages › Different car › Section 98 (Front Final Drive) › Preparation › Special Service Tools

Special Service Tools

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

SPECIAL SERVICE TOOLS CHART

Tool number
(Kent-Moore No.)
Tool name		 Description
KV381054S0
(J-34286)
Puller
G04875581Courtesy of NISSAN MOTOR CO., U.S.A.
  • Removing front oil seal
  • Removing side bearing outer race
ST33400001
(J-26082)
Drift
a: 60 mm (2.36 in) dia.
b: 47 mm (1.85 in) dia.
G04901806Courtesy of NISSAN MOTOR CO., U.S.A.
  • Installing front oil seal
  • Installing side oil seal (right side)
KV38102510
( - )
Drift
a: 71 mm (2.80 in) dia.
b: 65 mm (2.56 in) dia.
G04888832Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing front oil seal
KV38102100
(J-25803-01)
Drift
a: 44 mm (1.73 in) dia.
b: 36 mm (1.42 in) dia.
c: 24.5 mm (0.965 in) dia.
G05225440Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing side oil seal (left side)
ST30032000
(J-26010-01)
Drift
a: 80 mm (3.15 in) dia.
b: 38 mm (1.50 in) dia.
c: 31 mm (1.22 in) dia.
G05225441Courtesy of NISSAN MOTOR CO., U.S.A.
  • Installing drive pinion rear bearing inner race
  • Installing side shaft
ST3127S000
(J-25765-A)
Preload gauge
1: GG91030000
(J-25765)
Torque wrench
2: HT62940000
( - )
Socket adapter (1/2")
3: HT62900000
( - )
Socket adapter (3/8")
G04876269Courtesy of NISSAN MOTOR CO., U.S.A.
 Measuring pinion bearing preload and total preload
KV10111100
(J-37228)
Seal cutter
G04876270Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing carrier cover
ST3306S001
(J-22888-D)
Differential side bearing puller set
1: ST33051001
(J-22888-20)
Puller
2: ST33061000
(J-8107-2)
Base
a: 28.5 mm (1.122 in) dia.
b: 38 mm (1.50 in) dia.
G04876271Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing and installing side bearing inner race
ST30031000
(J-22912-01)
Replacer
G04876272Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing pinion rear bearing inner race
KV31103000
(J-38982)
Drift
a: 49 mm (1.93 in) dia.
b: 70 mm (2.76 in) dia.
G05225446Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing side bearing outer race
ST30611000
(J-25742-1)
Drift bar
G04876275Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing side bearing outer race (Use with
KV31103000)
ST37820000
( - )
Drift
a: 39 mm (1.54 in) dia.
b: 72 mm (2.83 in) dia.
G04921332Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing drive pinion front and rear bearing outer race
ST33230000
(J-25805-01)
Drift
a: 51 mm (2.01 in) dia.
b: 41 mm (1.61 in) dia.
c: 28.5 mm (1.122 in) dia.
G05225449Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing side bearing inner race
KV38100200
( - )
Drift
a: 65 mm (2.56 in) dia.
b: 49 mm (1.93 in) dia.
G04876266Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing side shaft oil seal
(J-8129)
Spring gauge
G04876278Courtesy of NISSAN MOTOR CO., U.S.A.
 Measuring turning torque
About FixVault