FixVault
Home › Infiniti › 2008 › M45 x › Repair and Diagnosis › Brakes › Traction Control › Brake Control System › VDC/TCS/Abs › G-Sensor › Removal and Installation › Removal

Removal and Installation: Removal

  1. Remove center console. Refer to "COMPONENT PARTS DRAWING ".
  2. Disconnect yaw rate/side G sensor harness connector.
  3. Remove mounting bolts. Remove yaw rate/side G sensor (1).
    Fig 1: Identifying Yaw Rate/Side G Sensor
    G05211868Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault