FixVault
Home › Infiniti › 2008 › QX56 AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - DTCS P0327 To P1145 › DTC P0340: CMP Sensor (Phase) › DTC Confirmation Procedure › With Consult-III

With Consult-III

  1. Turn ignition switch ON.
  2. Crank engine for at least 2 seconds and run it for at least 5 seconds at idle speed.
  3. Check 1st trip DTC.
  4. If 1st trip DTC is detected, go to "DIAGNOSIS PROCEDURE ".

    If 1st trip DTC is not detected, go to next step.

  5. Maintaining engine speed at more than 800 RPM for at least 5 seconds.
  6. Check 1st trip DTC.
  7. If 1st trip DTC is detected, go to "DIAGNOSIS PROCEDURE ".
About FixVault