FixVault
Home › Infiniti › 2008 › QX56 AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - DTCS P0327 To P1145 › DTC P1140, P1145: IVT Control Position Sensor › DTC Confirmation Procedure › With Consult-III

With Consult-III

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-III.
  3. Maintain the following conditions for at least 10 seconds.
    ENG SPEED SPECIFICATION

    ENG SPEED More than idle speed
    Selector lever P or N position
  4. Check 1st trip DTC.
  5. If 1st trip DTC is detected, go to "DIAGNOSIS PROCEDURE ".
About FixVault