FixVault
Home › Infiniti › 2008 › QX56 RWD › Repair and Diagnosis › Suspension › Suspension Control Systems › Basic Inspection › Diagnosis And Repair Work Flow › Work Flow › Detailed Flow

Detailed Flow

  1. INTERVIEW FOR MALFUNCTION

    Interview the customer about the symptom.

    GO TO 2

  2. SYMPTOM CHECK

    Verify the symptom from the customer's information.

    GO TO 3

  3. BASIC INSPECTION

    Check the operation of each part. Check that no symptoms occur other than those specified by the customer.

    GO TO 4

  4. SELF-DIAGNOSIS WITH CONSULT-III

    Perform the self diagnosis with CONSULT-III. Check that any DTC is detected.

    Is any DTC detected? 

    YES: GO TO 5

    NO: GO TO  6

  5. TROUBLE DIAGNOSIS BY DTC

    Perform the trouble diagnosis for the detected DTC. Specify the malfunctioning part.

    GO TO  7

  6. SYMPTOM DIAGNOSIS

    Perform the symptom diagnosis. Specify the malfunctioning part.

    GO TO 7

  7. MALFUNCTIONING PART REPAIR

    Repair or replace the malfunctioning part.

    GO TO 8

  8. REPAIR CHECK (SELF-DIAGNOSIS WITH CONSULT-III)

    Perform the self diagnosis with CONSULT-III. Verified that no DTCs are detected. Erase all DTCs detected prior to the repair. Verify that DTC is not detected again.

    Is any DTC detected? 

    YES: GO TO  5

    NO: GO TO 9

  9. REPAIR CHECK (OPERATION CHECK)

    Check the operation of each part.

    Does it operate normally? 

    YES: INSPECTION END

    NO: GO TO  3

About FixVault