General Specifications
WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Applied model | 2WD | |
| VQ35HR | ||
| A/T | ||
| Propeller shaft model | 3S80A-R | |
| Number of joints | 3 | |
| Type of journal bearings (Non-disassembly type) | 1st joint | Shell type |
| 2nd joint | Shell type | |
| 3rd joint | Rubber coupling type | |
| Coupling method with transmission | Sleeve type | |
| Coupling method with rear final drive | Rubber coupling type | |
| Shaft length | 1st (Spider to spider) | 704 mm (27.72 in) |
| 2nd (Spider to rubber coupling center) | 739 mm (29.09 in) | |
| Shaft outer diameter | 1st | 82.6 mm (3.252 in) |
| 2nd | 75.0 mm (2.953 in) | |