With Consult-III

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

To locate the EVAP leak, install EVAP service port adapter (commercial service tool) and pressure pump to EVAP service port.
Turn ignition switch ON.
Select the "EVAP SYSTEM CLOSE" of "WORK SUPPORT" mode with CONSULT-III.
Touch "START". A bar graph (Pressure indicating display) will appear on the screen.
Apply positive pressure to the EVAP system until the pressure indicator reaches the middle of the bar graph.
Remove EVAP service port adapter (commercial service tool) and hose with pressure pump.
Locate the leak using a leak detector (commercial service tool). Refer to "SYSTEM DIAGRAM ".

Fig 1: Installing EVAP Service Port Adapter And Pressure Pump To EVAP Service Port
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Identifying Leak Detector
Courtesy of NISSAN MOTOR CO., U.S.A.