FixVault
Home › Infiniti › 2009 › EX35 Base, RWD › Repair and Diagnosis › Electrical › Body Electrical › Power Control System › Power Distribution System › Component Diagnosis › DTC B2614: Acc Relay › Component Inspection

Component Inspection

  1. CHECK ACCESSORY RELAY
    1. Turn ignition switch OFF.
    2. Remove accessory relay.
    3. Check the continuity between accessory relay terminals.
      TERMINALS CONTINUITY REFERENCE CHART

      Terminals Condition Continuity
      3 and 5 12 V direct current supply between terminals 1 and 2 Existed
      No current supply Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace accessory relay.

      Fig 1: Checking Continuity Between Accessory Relay Terminals
      G04889520Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault