Component Function Check
- CHECK FUNCTION
- Turn ignition switch ON.
- Select "TILT SW-UP", "TILT SW-DOWN" in "Data monitor" mode with CONSULT-III.
- Check tilt switch signal under the following conditions.
DATA MONITOR REFERENCE
| Monitor item | Condition | Status | |
|---|---|---|---|
| TILT SW-UP | Tilt switch (up) | Operate | ON |
| Release | OFF | ||
| TILT SW-DOWN | Tilt switch (down) | Operate | ON |
| Release | OFF | ||
Is the indication normal?
YES: INSPECTION END
NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".