FixVault
Home › Infiniti › 2009 › FX50 › Repair and Diagnosis › Body & Frame › Door Locks › Security Control System › Component Diagnosis › DTC B2601: Shift Position › Component Inspection

Component Inspection

  1. CHECK CONTROL DEVICE (DETENTION SWITCH)
    1. Turn ignition switch OFF.
    2. Disconnect control device connector.
    3. Check continuity between control device (detention switch) terminals.
    CONNECTOR TERMINAL CONTINUITY CHART

    Control device (detention switch) Condition Continuity
    Terminal
    10 11 Selector lever P position Not existed
    Other than above Existed

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace control device. Refer to "REMOVAL AND INSTALLATION " (VQ35HR) or "REMOVAL AND INSTALLATION " (VK50VE).

About FixVault