Component Function Check
- CHECK FUNCTION
- Turn ignition switch ON.
- Select "LIFT FR SW-UP", "LIFT FR SW-DN" in "Data monitor" mode with CONSULT-III.
- Check lifting switch (front) signal under the following conditions.
DATA MONITOR REFERENCE
| Monitor item | Condition | Status | |
|---|---|---|---|
| LIFT FR SW-UP | Lifting switch front (up) | Operate | ON |
| Release | OFF | ||
| LIFT FR SW-DN | Lifting switch front (down) | Operate | ON |
| Release | OFF | ||
Is the indication normal?
YES: INSPECTION END
NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".