DRIVER SIDE : Component Function Check
- CHECK FUNCTION
- Turn ignition switch ON.
- Select "MIR/SEN LH U-D", "MIR/SEN LH R-L" in "Data monitor" with CONSULT-III.
- Check mirror sensor (driver side) signal under the following condition.
DATA MONITOR REFERENCE
| Monitor item | Condition | Value |
|---|---|---|
| MIR/SEN LH U-D | Door mirror (driver side) | Change between 3.4 [V] (close to peak) 0.6 [V] (close to valley) |
| MIR/SEN LH R-L | Change between 0.6 [V] (close to left edge) 3.4 [V] (close to right edge) |
Is the indication normal?
YES: INSPECTION END
NO: Perform diagnosis procedure. Refer to "DRIVER SIDE : DIAGNOSIS PROCEDURE ".