FixVault
Home › Infiniti › 2009 › G37 Base, 2D Coupe › Repair and Diagnosis › Steering › Steering Control Systems › Steering Control System -- Coupe › With 4WAS › On-Vehicle Repair › 4WAS Main Control Unit › Removal and Installation › Notes

Removal and Installation: Notes

  1. Turn the ignition switch OFF.
  2. Remove the rear wheel house finisher. Refer to "EXPLODED VIEW ".
  3. Disconnect 4WAS main control unit connectors, 4WAS rear motor relay connector and noise suppressor connectors.
  4. Remove the 4WAS main control unit bolt and nuts.
  5. Remove the 4WAS main control unit (1).
    Fig 1: Locating 4WAS Main Control Unit Bolt And Nuts
    G05735283Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault