Removal and Installation: Installation

WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.

Note the following, and install in the reverse order of removal.

When installing the transfer to the transmission, install the mounting bolts following the standard below.

MOUNTING BOLTS STANDARD CHART

Bolt No.	1	2	3	4
Quantity	4	3	2	1
Bolt length "l " mm (in)	75 (2.95)	45 (1.77)	40 (1.57)	30 (1.18)
Tightening torque N.m (kg-m, ft-lb)	37 (3.8, 27)

After the installation, check the fluid level, fluid leakage and the A/T positions. Refer to "INSPECTION ", "ADJUSTMENT OF A/T POSITION ".

Fig 1: Identifying Mounting Bolt Length
Courtesy of NISSAN MOTOR CO., U.S.A.