FixVault
Home › Infiniti › 2009 › M35 Base › Repair and Diagnosis › External Pages › Different car › Section 154 (Supplemental Restraint System) › Occupant Classification System › DTC Check/Clear

DTC Check/Clear

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 

    HINT:

    • When DTC B1650/23 is detected as a result of troubleshooting the airbag system, troubleshoot the occupant classification system.
    • Use the Techstream to read and clear DTCs, otherwise the DTCs cannot be read and cleared.
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical/Occupant Detection/Trouble Codes.
      Fig 1: Identifying Passenger Airbag ON/OFF Indicator
      G05155895Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical/Occupant Detection/Trouble Codes.
    5. Erase the DTCs.
About FixVault