Ignition Key Cylinder Light: Removal
WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL NOTE:
- After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.
- Some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
- REMOVE LOWER STEERING COLUMN COVER (See REMOVAL )
- REMOVE UPPER STEERING COLUMN COVER (See REMOVAL )
- REMOVE IGNITION KEY CYLINDER LIGHT
- Disconnect the unlock warning switch connector.
- Detach the 2 claws.
- Disconnect the connector and remove the key cylinder light.