Rear Combination Light Assembly: Installation

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedures for the RH and LH side.
The procedures listed below are for the LH side.

INSTALL REAR COMBINATION LIGHT ASSEMBLY LH
1. Attach the 2 clips to install the combination light.
2. Install the 2 bolts.
3. Connect the connector and clamps.
  
  Fig 1: Locating LH Rear Combination Light Assembly Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002