Front Passenger Side Power Window Switch: Removal

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE FRONT UPPER ARMREST BASE PANEL RH
1. Using a screwdriver, detach the 2 clips and 5 claws, and remove the front upper armrest base panel.
  
  Fig 1: Identifying Front Upper Armrest Base Panel Clips And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  HINT:
  
  Tape the screwdriver tip before use.
2. Disconnect the 2 connectors.
  
  Fig 2: Identifying Front Upper Armrest Base Panel Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY
1. Detach the 2 claws and remove the regulator switch.
  
  Fig 3: Identifying Power Window Regulator Switch Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002