CONSULT-III Function (BCM): Notes
WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
CONSULT-III is used with no connection of CONSULT-III CONVERTER, malfunction might be detected in self-diagnosis depending on control unit with carry out CAN communication.
CONSULT-III can display each diagnostic item using the diagnostic test modes shown.
DIAGNOSTIC TEST MODES
| BCM diagnosis test item | Check item diagnosis test mode | Content |
|---|---|---|
| Theft alm | WORK SUPPORT | Change setting of each function. |
| DATA MONITOR | Displays the input data of BCM real time. | |
| ACTIVE TEST | Gives a drive signal to a load to check the operation. |