FixVault
Home › Infiniti › 2009 › M35 Base › Repair and Diagnosis › Steering › Power Steering System › Service Information › Steering Wheel › Removal and Installation › Removal

Removal and Installation: Removal

NOTE: When reconnecting spiral cable, fix cable with a tape so that fixing case and rotating part keep aligned. This will omit neutral position alignment procedure during spiral cable installation.
  1. Set vehicle to the straight-ahead position.
  2. Remove driver air bag module. Refer to DRIVER AIR BAG MODULE .
  3. Remove steering wheel lock nut after steering is locked.
  4. Remove steering wheel with the steering wheel puller [SST].
    Fig 1: Removing Steering Wheel With Steering Wheel Puller
    G06310358Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault