FixVault
Home › Infiniti › 2009 › M35 Base › Repair and Diagnosis › Transmission › Transfer Case › Service Information › Transfer Fluid › Inspection › Fluid Leakage And Fluid Level

Fluid Leakage And Fluid Level

  1. Check if fluid is leaking from transfer or around it.
  2. Check fluid level from filler plug mounting hole as shown in the figure.
    CAUTION: Never start engine while checking fluid level.
  3. Before installing filler plug, set a new gasket. Install filler plug on transfer and tighten to the specified torque. Refer to "DISASSEMBLY AND ASSEMBLY ".
    CAUTION: Do not reuse gasket.
    Fig 1: Checking Fluid Level
    G05225308Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault