FixVault

Removal and Installation of Rear View Camera Control Unit: Removal

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove instrument clock finisher and A/T console finisher. Refer to "INSTRUMENT PANEL ASSEMBLY ".
  2. Remove screws (2), and remove rear view camera control unit.
  3. Fig 1: Locating Screws On Rear View Camera Control Unit
    G05222489Courtesy of NISSAN MOTOR CO., U.S.A.