Check power Window Motor (Front Driver Side) Circuit

CHECK POWER WINDOW MAIN SWITCH OUTPUT SIGNAL

Check voltage between power window main switch connector and ground.

VOLTAGE SPECIFICATION

Terminal			Window Condition	Voltage (V) (Approx.)
(+)		(-)
Power window main switch connector	Terminal	(-)
D10	8	Ground	UP	Battery voltage
	8		DOWN	0
	11		UP	0
	11		DOWN	Battery voltage

Fig 1: Checking Voltage Between Power Window Main Switch Connector And Ground

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG

OK: GO TO 2.

NG: Replace power window main switch.

CHECK HARNESS CONTINUITY

Turn ignition switch OFF.
Disconnect power window main switch and power window motor (front driver side) connector.

Check continuity between power window main switch connector and power window motor (front driver side).

CONTINUITY SPECIFICATION

A		B		Continuity
Power window main switch connector	Terminal	Power window motor (front driver side) connector	Terminal	Continuity
D10	8	D12	2	Yes
D10	11	D12	1	Yes

Fig 2: Checking Continuity Between Power Window Main Switch Connector And Power Window Motor (Front Driver Side)

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG

OK: Replace power window motor (front driver side).

NG: Repair or replace harness.