FixVault

Data Monitor

WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.
SELECTION FROM MENU DATA MONITOR

Monitor item [OPERATION or UNIT] Contents
SET SW "ON/OFF" ON/OFF status judged from the setting switch signal is displayed.
MEMORY SW1 "ON/OFF" ON/OFF status judged from the seat memory switch 1 signal is displayed.
MEMORY SW2 "ON/OFF" ON/OFF status judged from the seat memory switch 2 signal is displayed.
SLIDE SW-FR "ON/OFF" ON/OFF status judged from the sliding switch (FR) signal is displayed.
SLIDE SW-RR "ON/OFF" ON/OFF status judged from the sliding switch (RR) signal is displayed.
RECLN SW-FR "ON/OFF" ON/OFF status judged from the reclining switch (FR) signal is displayed.
RECLN SW-RR "ON/OFF" ON/OFF status judged from the reclining switch (RR) signal is displayed.
LIFT FR SW-UP "ON/OFF" ON/OFF status judged from the FR lifting switch (UP) signal is displayed.
LIFT FR SW-DN "ON/OFF" ON/OFF status judged from the FR lifting switch (DOWN) signal is displayed.
LIFT RR SW-UP "ON/OFF" ON/OFF status judged from the RR lifting switch (UP) signal is displayed.
LIFT RR SW-DN "ON/OFF" ON/OFF status judged from the RR lifting switch (DOWN) signal is displayed.
MIR CON SW-UP "ON/OFF" ON/OFF status judged from the door mirror remote control switch (UP) signal is displayed.
MIR CON SW-DN "ON/OFF" ON/OFF status judged from the door mirror remote control switch (DOWN) signal is displayed.
MIR CON SW-RH "ON/OFF" ON/OFF status judged from the door mirror remote control switch (RIGHT) signal is displayed.
MIR CON SW-LH "ON/OFF" ON/OFF status judged from the door mirror remote control switch (LEFT) signal is displayed.
MIR CHNG SW-R "ON/OFF" ON/OFF status judged from the door mirror remote control switch (switching to RIGHT) signal is displayed.
MIR CHNG SW-L "ON/OFF" ON/OFF status judged from the door mirror remote control switch (switching to LEFT) signal is displayed.
TILT SW-UP "ON/OFF" ON/OFF status judged from the tilt switch (UP) signal is displayed.
TILT SW-DOWN "ON/OFF" ON/OFF status judged from the tilt switch (DOWN) signal is displayed.
TELESCO SW-FR "ON/OFF" ON/OFF status judged from the telescoping switch (FR) signal is displayed.
TELESCO SW-RR "ON/OFF" ON/OFF status judged from the telescoping switch (RR) signal is displayed.
DETENT SW "ON/OFF" The selector lever position "OFF (P position) / ON (other than P position)" judged from the detention switch signal is displayed.
STARTER SW "ON/OFF" Ignition key switch ON (START, ON) /OFF (IGN, ACC, or OFF) status judged from the ignition switch signal is displayed.
SLIDE PULSE - Value (32768) when battery connects is as standard. If it moves backward, the value increases. If it moves forward, the value decreases.
RECLN PULSE - Value (32768) when battery connects is as standard. If it moves backward, the value increases. If it moves forward, the value decreases.
LIFT FR PULSE - Value (32768) when battery connects is as standard. If it moves DOWN, the value increases. If it moves UP, the value decreases.
LIFT RR PULSE - Value (32768) when battery connects is as standard. If it moves DOWN, the value increases. If it moves UP, the value decreases.
MIR/SEN RH U-D "V" Voltage output from RH door mirror sensor (UP/DOWN) is displayed.
MIR/SEN RH R-L "V" Voltage output from RH door mirror sensor (LH/RH) is displayed.
MIR/SEN LH U-D "V" Voltage output from LH door mirror sensor (UP/DOWN) is displayed.
MIR/SEN LH R-L "V" Voltage output from LH door mirror sensor (LH/RH) is displayed.