Transfer Fluid: Replacement: Filling
WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.
- Remove filler plug and add transfer fluid until fluid level reaches the specified limit near filler plug mounting hole.
Fluid capacity
: Approx. 1.25 l (2-5/8 US pt, 2-1/4 lmp pt)
CAUTION: Carefully fill the fluid. (Fill up for approx. 3 minutes.) - Leave the vehicle for 3 minutes, and check the fluid level again.
- Set a new gasket onto filler plug and install it on transfer and tighten to the specified torque. Refer to
"COMPONENTS ".CAUTION: Do not reuse gasket.