Control Device Removal and Installation: Installation
WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.
Note the following, and install in the reverse order of removal.
- After installation is completed, adjust and check A/T position. Refer to "ADJUSTMENT OF A/T POSITION " and "CHECKING OF A/T POSITION ".
Note the following, and install in the reverse order of removal.
NOTE:
Bend control device assembly (1) to vehicle, then insert lower lever (2) to the rear of vehicle.
- After installation is completed, adjust and check A/T position. Refer to "ADJUSTMENT OF A/T POSITION " and "CHECKING OF A/T POSITION ".