Front Axle Hub: Disassembly

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Do not allow foreign matter, etc. to contact the ABS rotor bearing.

REMOVE FRONT WHEEL ADJUSTING NUT (for 2WD)
1. Using SST and a hammer, release the staked part of the adjusting nut.
  SST 09930-00010
  
  Fig 1: Unstaking Front Wheel Adjusting Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install a nut to the front axle hub, and fix it in a vise.
3. Using SST and the L-type handle, remove the front wheel adjusting nut.
  SST: 09602-60010
  
  Fig 2: Removing Front Wheel Adjusting Nut Using SST
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY
1. Gently fix the front axle hub in a vise.
  NOTE: Do not damage the threads of the hub bolts.
  
  Fig 3: Fixing Front Axle Hub In Vise
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using SST, remove the bearing.
  SST: 09950-40011 (09951-04020) (09952-04010) (09953-04020) (09954-04010) (09955-04061) (09957-04010) (09958-04011)
  
  SST: 09950-60010 (09951-00550)
3. If part of the bearing remains in the front axle hub, use SST to remove it.
  SST: 09950-00020
  
  SST: 09950-00030
  
  Fig 4: Removing Bearing Part Using SST
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT AXLE HUB OIL SEAL
1. Using a screwdriver, pry the oil seal.
Fig 5: Prying Oil Seal
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002