Customize Parameters

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

CUSTOMIZING FUNCTION WITH TECHSTREAM

HINT:

The following items can be customized.

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Connect the Techstream to the DLC3.
Turn the ignition switch ON.
Turn the tester on.
Enter the following menus:
Techstream - Select: Customize Setting.

Select the setting by referring to the table below.

Techstream

Main Body

TECHSTREAM MAIN BODY

Display	Default	Contents	Setting
Unlock Key Twice	ON	Function that unlocks only driver side door when driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. For OFF setting, turning it once unlocks all doors.	ON/OFF
Auto lock	OFF	Function that locks all doors when vehicle speed reaches a certain level.	ON/OFF
Auto Lock/Shift	ON	With engine running and all doors closed, function that locks all doors when lever is moved to P from any position other than P.	ON/OFF
Auto Unlock/Shift	ON	Function that unlocks all doors when lever is moved to P from any position other than P while ignition switch is ON.	ON/OFF
All Unlock/Open-Close	OFF	Function that unlocks all other doors when opening driver door within 10 seconds after turning ignition switch ON.	ON/OFF