Unlock Warning Switch: Installation

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL UNLOCK WARNING SWITCH ASSEMBLY

Fig 1: Identifying Unlock Warning Switch Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. If reusing unlock warning switch assembly:
  1. Temporarily install the unlock warning switch.
  2. Install the contact pin cap.
  3. Attach the 3 claws to install the cover.
    
    Fig 2: Identifying Claws On Warning Switch Cover
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. If replacing unlock warning switch assembly:
  1. While pushing the pin, slide the switch to install the warning switch.
    
    Fig 3: Pushing Pin
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the unlock warning switch connector.
Fig 4: Identifying Unlock Warning Switch Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LOWER STEERING COLUMN COVER (for Power Tilt and Power Telescopic) (See INSTALLATION )
INSTALL LOWER STEERING COLUMN COVER (for Manual Tilt and Telescopic) (See INSTALLATION )