Customize Parameters

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)

HINT:

The following items can be customized.

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Connect the Techstream to the DLC3.
Turn the ignition switch ON.
Turn the tester ON.
Enter the following menus:
Techstream - Select: Customize Setting.

Select the setting by referring to the table below.

Techstream

Main Body

TECHSTREAM DATA LIST - MAIN BODY

Display	Default	Contents	Setting
Hazard Answer Back	ON	When LOCK switch on transmitter is pressed, all hazard warning lights illuminate once. When UNLOCK switch is pressed, all hazard warning lights illuminate twice.	ON / OFF
Wireless Buzzer Resp	ON	Function that makes wireless buzzer sound for answer-back when transmitter LOCK / UNLOCK switch is pressed.	ON / OFF
Open Door Warning	ON	If door is not completely closed and transmitter LOCK switch is pressed, this function sounds a buzzer for 10 seconds.	ON / OFF
Wireless Control	ON	ON / OFF of wireless door lock function.	ON / OFF
Panic Function	ON	Operates security alarm when PANIC switch on transmitter is continuously pressed for 1 second.	ON / OFF
Unlock / 2 Operation	ON	Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock.	ON / OFF
Wireless Auto Lock	ON	Function to control automatic relocking of doors after unlocking with wireless door lock function.	ON / OFF
Auto Lock Time	30 seconds	Function to change time until relocking after unlocking.	60 seconds/30 seconds