FixVault
Home › Infiniti › 2009 › M45 Base › Repair and Diagnosis › External Pages › Different car › Section 44 (Meter) › Accessory Meter › Installation

Accessory Meter: Installation

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ACCESSORY METER ASSEMBLY 
    1. Install the accessory meter with the 3 screws.
      2. Fig 1: Identifying Accessory Meter With Screws
      G05161230Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the accessory meter connector.
  2. INSTALL DEFROSTER NOZZLE ASSEMBLY  (See REASSEMBLY )
  3. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT  (See REASSEMBLY )
  4. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY  (See REASSEMBLY )
  5. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT  (See REASSEMBLY )
  6. INSTALL NO. 1 HEATER TO REGISTER DUCT WITH NO. 2 HEATER TO REGISTER DUCT  (See INSTALLATION )
  7. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY 
    1. for Column Shift Type:

      Install the instrument panel (See INSTALLATION ).

    2. for Floor Shift Type:

      Install the instrument panel (see INSTALLATION ).

About FixVault